CommunityForumWikiBlogLearn
Prototyping & Accessories
Enclosure&Case

1.6 Inch 84x48 LCD Display Module with Backlight for Raspberry Pi

SKU: FIT0820

This small 1.6” LCD display with backlight (84*48 resolution) works with all Raspberry Pi via 26Pin GPIO—inserting it doesn’t block secondary pin use. Programming lets it show Pi status (CPU/memory/IP/temp) or experiment data (ultrasonic distance, temp/humidity). Backlight control ensures clarity in dark environments, with a back jumper for programmatic control.

Front of Raspberry Pi 4 case with 3.5" touch screen displaying scenery connected via cable-DFRobot product sku:FIT0820 image.
  • Docs
  • Tech Specs

    • Specification

    Parameter Details
    Size 1.6 inches
    Resolution 84×48
    Design 26Pin GPIO Pin Header Design
    Compatibility Compatible with All Series of Raspberry Pi
    Feature With Backlight Control
    Weight 19.6g

    Pinout

    Num Label Description
    1, 17 3.3V Power positive (3.3V power input)
    2, 4 5V Power positive (5V power input)
    3, 5, 7, 8, 10, 12, 13, 15, 16 NC NC floating
    6, 9, 14, 20, 25 GND Ground wire
    11 TP_IRQ The touch panel is interrupted, and it is low when the touch panel is detected to be pressed
    18 LCD_RS Instruction/data register selection, low level is instruction, high level is data
    19 LCD_SI / TP_SI SPI data input for LCD display/touch panel
    21 TP_SO SPI data output of touch panel
    22 RST Reset signal, low level reset
    23 LCD_SCK / TP_SCK SPI clock signal for LCD display/touch panel
    24 LCD_CS LCD chip select signal, low level enable
    26 TP_CS Touch panel chip select signal, low level enable

    Was this article helpful?

    TOP