SKU: KIT0197
The DFM8001 Indoor Ambient Energy Harvesting Kit provides efficient energy harvesting indoors utilizing mechanical, thermal, solar, and radio frequencies, complete with dynamic MPPT and energy storage, offering innovative solutions for sustainable power needs.
Downloadable Resources
FAQ
Super interesting device! Only couple questions:
1) on page 13 of the datasheet the last sentence says "MPPT configuration pins MPPT[1:0] are connected
to GND and configured to 70%" but table 6 shows that with MPTT[1:0] set to 0 0 mptt ratio is set to 90%
2) the example circuit on page 13 shows the SET_OD, SET_CR, SET_OC shorted together and left floating, but on page 11 is said that these pins should be left floating ( and I assume not connected together ) when using predefined modes, are both ok?
The MPPT configuration of the DFM8001 is not efficient at RF energy harvesting, but can still harvest RF energy. Our R&D team is working on a variety of new weak energy harvesting products to efficiently harvest all types of environmental energy.
Was this article helpful?
