A01NYUB Ultrasonic Distance Sensor

1. Example Code for Arduino-Distance Measurement

This article offers an in-depth guide to setting up and coding for distance measurement using an Arduino UNO and A01NYUB ultrasonic sensor, including hardware requirements, software preparation, wiring instructions, sample code, and expected output results.

2. Example Code for Raspberry Pi-Distance Measurement

This example use A01NYUB ultrasonic sensor to measure distance on Raspberry Pi. With the sensor library, we can get the measured distance value.

Reference

The article provides a comprehensive overview of ultrasonic sensor communication protocols and API usage for Arduino and Raspberry Pi, detailing UART output data, checksum calculation, and distance measurement principles.

Parameter	Value
Operating Voltage	3.3V-5v
Average Current	≤15mA
Blind Zone Distance	0-28cm
Ranging Distance for Flat Object	28-750cm
distance resolution	1mm
Output	UART
Response Time	100ms
Probe Center Frequency	40K±1.0K
Operating Temperature	-15~60℃
Storage Temperature	-25~80℃
Protection Rate	IP67

Label	Name	Description
1	VCC	Power Input
2	GND	Ground
3	RX	Processed Value/Real-time Value Output Selection
4	TX	UART Output

A01NYUB Ultrasonic Distance Sensor

Specification

Pinout