Fermion: SHT35 Temperature and Humidity Sensor

1. Example Code for Arduino-Single Measurement Mode

In single measurement mode, the sensor collects data every time the controller board sends out the data collection command. The power consumption could be very low in this mode since users can read data according to their needs.

2. Example Code for Arduino-Period Measurement Mode

This project uses the period measurement mode, where the sensor collects data at user-defined intervals to provide continuous and stable readings.

3. Example Code for Arduino-Temperature & Humidity Alarm

This project demonstrates how to configure temperature and humidity thresholds, where the INT pin generates an alarm signal whenever the measured value exceeds the set limit.