SKU: SEN0518
The MAX30102 PPG heart rate and oximeter sensor is engineered for accurate health monitoring, featuring low power consumption, I2C/UART communication, and a broad operating temperature range, making it perfect for integration into wearable technology and health monitoring systems.
Downloadable Resources
1. Example Code for Arduino-Get Heart Rate and Blood Oxygen Data
This article offers a comprehensive guide on using Arduino with the MAX30102 sensor to measure heart rate and blood oxygen levels, covering hardware and software setup, wiring instructions, and example code for efficient data monitoring.
2. Example Code for Raspberry Pi-Get Heart Rate and Blood Oxygen Data
The article provides a comprehensive guide to setting up a Raspberry Pi with a heart rate and oximeter sensor, detailing hardware and software preparation, connection setup, and Python coding to extract heart rate and blood oxygen data effectively.
Reference
The article serves as a reference for understanding various libraries and communication protocols used in sensors, particularly focusing on heart rate, blood oxygen, and temperature data collection using Arduino and Raspberry Pi, along with CRC check algorithms and setup instructions.
FAQ
hi. im interested with this project since it is somewhat similar to mine, can i directly connect my max30102 to the beetle and send to the pc for further processing? and do i need to purchase an USB ble link so that i can upload arduino code to the beetle microcontroller? because the arduino does not recognizing the beetle, it just shows red lights when it is plugged in. thank you so much for your help.
Hi, The data manual is the data manual of MAX30102. There is also an MCU on the sensor for further data processing, so the instructions in the Arduino library file are different from the data manual. As shown below, 0x14 is sent to V8520 rather than communicating directly with MAX30102:
https://uploads.disquscdn.c...
Was this article helpful?
