SKU: SER0002
The HS422 Servo Module is renowned for its durability and modification ease, making it ideal for inexpensive robotic applications. It features bronze bushings and an indirect drive potentiometer, allowing easy adaptation for wheeled applications and providing great value.
| Parameter | Details |
|---|---|
| Control System | +Pulse Width Control 1500usec Neutral |
| Required Pulse | 3-5 Volt Peak to Peak Square Wave |
| Operating Voltage | 4.8-6.0 Volts |
| Operating Temperature Range | -20 to +60 Degree C |
| Operating Speed (4.8V) | 0.21sec/60° at no load |
| Operating Speed (6.0V) | 0.16sec/60° at no load |
| Stall Torque (4.8V) | 45.82 oz/in. (3.3kg.cm) |
| Stall Torque (6.0V) | 56.93 oz/in. (4.1kg.cm) |
| Operating Angle | 45 Deg. one side pulse traveling 400usec |
| 360 Modifiable | Yes |
| Direction | Clockwise/Pulse Traveling 1500 to 1900usec |
| Current Drain (4.8V) | 8mA/idle and 150mA no load operating |
| Current Drain (6.0V) | 8.8mA/idle and 180mA no load operating |
| Dead Band Width | 8usec |
| Motor Type | 3 Pole Ferrite |
| Potentiometer Drive | Indirect Drive |
| Bearing Type | Dual Oilite Bushing |
| Gear Type | Nylon |
| Connector Wire Length | 11.81" (300mm) |
| Dimensions | See Schematics |
| Weight | 1.6oz (45.5g) |
Was this article helpful?