RainbowLink-V2 USB Protocol Converter Module

SKU: TEL0190

RainbowLink-V2 is an upgraded USB Protocol Converter in the RainbowLink series, with 4 independent channels (1 isolated RS485, 1 isolated RS232, 2 TTL). RS232/RS485 are fully isolated, and it has a fully enclosed PC plastic housing. It outputs 12V, 5V, 3.3V simultaneously, meeting industrial/agricultural sensors’ outdoor power needs without external supply. Lever-type quick-connect terminals enable easy, durable wiring; TTL/RS232 fit pin headers/female headers. Driver-free, 4 indicators help identify COM ports; dedicated driver shows port names directly for easy selection. One unit replaces four, eliminating messy wiring.

Overview of RainbowLink V2: 4-Channel Isolated USB to Serial Converter

Downloadable Resources

  • Docs
  • Tech Specs
  • Specification

    Parameter Description
    USB Interface TYPE-C
    Input Voltage 5V
    Baud Rate 2400-128000
    TTL Level 3.3V
    Number of TTL Channels 2
    Number of RS485 Channels (Fully Isolated) 1
    Number of RS232 Channels (Fully Isolated) 1
    Wire Gauge for Terminal Blocks 12AWG-22AWG
    3.3V Voltage Output Rated Current: 200mA
    5V Voltage Output This power interface is directly connected to the USB port. Therefore: Maximum current 2A when connected to PC's TYPE-C port; Maximum current 500mA when connected to PC's USB-A port
    12V Voltage Output Rated Current: 800mA
    Housing Material PC
    Dimensions 77mm×57mm×21mm

    Pinout

    TEL0190-rainbowLinkv2

    No. Name Function Description
    USB TYPE-C Port Connects to PC for communication and 5V power supply
    Power Indicator Light 3.3V, 5V and 12V power indicator lights
    Communication Indicator Light 4-channel RX and TX communication indicator lights for TTL1, TTL2, RS485 and RS232
    PWR OUT Power Output
    TTL1, TTL2 2-channel TTL Communication Ports
    GND System Ground
    12V Power Output
    RS485(A) Fully Isolated RS485 Port
    RS232(B) Fully Isolated RS232 Port
    GND2 Isolated Ground

    FAQ

    • What is the total power output of the power supply?
      The total power output of the power supply depends on the input power of the TYPE-C interface. Usually, the TYPE-C interface of a computer can provide 5V 2A output, and the USB-A port of a computer can provide 5V 0.5A output.
    • What if I cannot distinguish which actual port each of the 4 COMs corresponds to on the computer?
      There are two methods:

      1. Randomly select a COM port on the computer and send characters arbitrarily. You will see the corresponding indicator light on the right light up, and then you will know which port it is.
      2. Install the RainbowLink driver. Four port names will appear in the COM list, which are consistent with the port silk screen names on the product.
    • Can the power output terminal be short-circuited?
      Although RainbowLink has built-in short-circuit protection and overcurrent protection, try to avoid short-circuiting to prevent damage.
    • Are the 4 data channels independent of each other and can they communicate with each other?
      The 4 data channels are independent of each other and can communicate independently with USB, but cannot communicate with each other internally. For example, RS485 and TTL1 cannot communicate.
    • Are lever-type terminal blocks easy to break?
      The service life of lever-type terminal blocks can reach thousands of presses, so they are not easy to damage. However, the wire should not exceed 12AWG. Overly thick wires may cause deformation or damage to the compression reeds inside the terminal blocks.

    Explore More Related Questions >

    Was this article helpful?

    TOP