CommunityForumWikiBlogLearn

ATmega16U2 Arduino AVR ISP FTDI Programmer Kit

SKU: DFR0360

The ATmega16U2 Arduino AVR ISP FTDI Programmer Kit is a versatile tool designed for Arduino/AVR devices, supporting both ISP and FTDI interfaces with automatic ISP clock frequency matching. It provides dual power outputs (5V and 3.3V) and supports Xbee socket integration, making it a valuable asset for Arduino enthusiasts seeking reliable programming solutions.

Angled shot of XSP Arduino Programmer with USB drive, SD card, and power cable.-DFRobot product sku:DFR0360 image.

Downloadable Resources

  • Docs
  • Tech Specs

    • Specification

    Parameter Value
    Microcontroller ATmega16U2@16MHz
    Operating Voltage 5V DC
    Output Voltage 5V / 3.3V / OFF
    Output Current 300mA@5V / 60mA@3V3
    Interface ISP / FTDI / XBee
    Max ISP clock speed 2MHz
    Max FTDI baud rate 250000bps

    Pinout

    XSP consists of 3 parts, you could use them according to your application.

    XSP Kit

    Programmer

    DFR0360-Programmer

    Socket Pinout

    Mode/Pin 1 2 3 4 5 6 7 8
    FTDI:
    VCC
    DTR GND TX RX
    ISP: MISO VCC SCK MOSI RESET GND

    Note：
    DTR signal － If be enabled, high level default. When you open the serial port, it will output a 50ms low pulse, which could trigger MCU reset even if there is no 100nf capacitance connecting to MCU reset pin.

    Adaptor

    FTDI to XBee interface, ISP bonding pad reserved.

    DFR0360-Adaptor

    Note: FTDI doesn't include CTS signal, it is not used in Arduino.

    Cable

    DFR0360_Cable

    Was this article helpful?

    TOP