CommunityForumWikiBlogLearn

Gravity: VEML6075 UV Sensor Module

SKU: SEN0303

Gravity: VEML6075 UV Sensor Module uses Vishay VEML6075 (UVA/UVB channels, 16-bit resolution). It accurately converts solar UV to digital data, reliable under long exposure. Features temp compensation (-40℃~+85℃), low power (800nA shut-down), 3.3V-5V, IIC protocol. Compatible with Arduino/Raspberry Pi. Ideal for portable devices, wearables, weather stations, flame detection. Includes Arduino/Python libraries and Gravity connector (no soldering needed).

Front of small black UV sensor module with labeled components and USB connector, VEML6075-DFRobot product sku:SEN0303 image.

Downloadable Resources

  • Docs
  • Tech Specs

    • Specification

    Parameter Value
    Operating Voltage 3.3V~5V
    Operating Current 700uA
    Shut-down Mode 10uA
    UV Chip VEML6075
    Output digital output
    Response Wavelength UVB (λ0.5) within 315nm to 340nm; UVA (λ0.5) within 350nm to 375nm.
    Interface PH2.0-4P
    IIC Address 0x10
    Dimension 22×30mm/0.87×1.18”
    Mount Hole Size 3mm
    Mount Hole Pitch 15mm
    Operating Temperature -40℃~+85℃

    NOTE: to get more accurate measurement, the sensor should direct to ultraviolet light source.

    Pinout

    SEN0303 Gravity: VEML6075 UV Sensor Module Pinout
    Num Label Description
    1 SDA Serial Data Line
    2 SCL Serial Clock Line
    3 GND Ground
    4 VCC DC 3.3V~5.5V

    Was this article helpful?

    TOP