CommunityForumWikiBlogLearn

SSD1306 OLED Display Module

SKU: TOY0007

The SSD1306 OLED Display Module has no backlight, offering deep black levels, higher contrast in low light, and being thinner/lighter than LCDs. It supports Arduino controllers, is compact with high resolution. OLED tech is used in mobile devices, car radios, digital cameras, etc.

Angled shot of OLED 2864 display module with .NET Gadgeteer compatible components on circuit board-DFRobot product sku:TOY0007 image.
  • Docs
  • Tech Specs

    • Specification

    Parameter Details
    Working Voltage 3.3v
    Max power consumption 20mA@3v
    Connection & interface - .NET gadgeteer connector (IDC10) - Socket: I type
    - I2C for Arduino - 2.54mm pins x6
    Display compact and 128x64 high resolution
    Display size 0.96" oled display module
    Compatible controllers Support Dreamer Mega controller and .NET Gadgeteer-compatible mainboard
    Directly support Arduino controllers
    I2C pull-up resistors Switch used to enable/disable the pull-up resistors for I2C interface
    I2C address - 0x3C - DC pin connected to GND
    - 0x3D - DC pin connected to 3.3v
    Size 42x32x8mm

    Was this article helpful?

    TOP