CommunityForumWikiBlogLearn
Modules
Motors & Actuators & Drivers

DC Geared Motor with Encoder

SKU: FIT0186

This is a Gear Motor w/Encoder (model GB37Y3530-12V-251R). It’s a 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder (16 counts/rev motor shaft, 700 counts/rev output shaft). The 0.61" long, 6 mm D-shaped output shaft suits applications. It starts at 1V, with six M3 threaded mounting holes (15.5 mm apart, regular hexagon) on the face plate.

Angled shot of silver metal motor with black end cap and wire connector, 12V DC geared motor with encoder (251RPM, 18Kg.cm)-DFRobot product sku:FIT0186 image.
  • Docs
  • Tech Specs

    • Specification

    Parameter Value
    Gear ratio 43.8:1
    No-load speed 251 ± 10% RPM
    No-load current 350 mA
    Start Voltage 1.0 V
    Stall Torque 18 Kg·cm
    Stall Current 7 A
    Insulation resistance 20 MΩ
    Encoder Operating Voltage 5 V
    Encoder type Hall
    Encoder Resolution 16 CPR (motor shaft)/700 CPR (gearbox shaft)
    Weight 205 g

    Was this article helpful?

    TOP