Fermion: GR10-30 Gesture Recognition Sensor

SKU: SEN0543

The GR10-30 gesture sensor recognizes 12 hand gestures: up/down/left/right, forward/back, clockwise/counterclockwise (continuous), hover, and wave. Users adjust parameters (distance, rotation angle, hovering time, window size) for accuracy. It offers stable, high accuracy up to 30cm, with two interrupt pins (gesture trigger, object entry). Ideal for non-contact apps: gesture remotes, robot interaction, HMI, lighting control, gesture games.

Front of gesture sensor breakout module with UART and I2C interface for motion sensing and gesture recognition.-DFRobot product sku:SEN0543 image.

Downloadable Resources

  • Docs
  • Tech Specs
  • Projects
  • Specification

    Parameter Specification
    Supply Voltage 3.3V to 5V
    Operating Current <10mA
    I2C Address 0x73
    Baud Rate 9600
    Maximum Recognition Distance 30cm
    Operating Temperature 0℃ to 70℃
    Operating Humidity 5%RH to 85%RH
    Dimension 20.5×23.5mm/0.81×0.93"

    Pinout

    Num Label Description
    1 VCC Power +
    2 GND Power -
    3 SCL I2C clock line
    4 SDA I2C data line
    5 RST Reset pin
    6 INT2 Object motion detection
    Output high when there is an object moving in the detection range, and output low if there is no object and when the object is stationary or the detection area is completely blocked for over 3s
    7 INT1 Gesture recognition interrupt
    Pulses (10ms) occur when a gesture is recognized
    8 TX Serial transmit
    9 RX Serial receive

    Was this article helpful?

    TOP