CommunityForumWikiBlogLearn
Sensors
Temperature & Humidity Sensor

BOSON Humidity Sensor i18

SKU: BOS0041

The humidity sensor is used to detect the humidity levels in the atmosphere and output relevant information. The main difference between a humidity sensor and moisture sensor is that the former is a measurement of water in gas state while the later is used to detect the content of water in liquid state. This sensor is designed for a wide range of applications, such as industrial process control systems, storage and warehouses, climate control for green-houses, meteorological applications, office automation, room comfort control, automotive cabin air control, and so on.

Boson: Humidity Sensor
  • Docs
  • Tech Specs

    • 1. Example Code for Other-Indoor Humidity Comparison

    The article offers example code and setup guidance for comparing indoor humidity using sensors and OLED displays, detailing hardware preparation, wiring diagrams, and sample code execution.

    2. Example Code for micro:bit-Plant Incubator

    The article offers example code and setup instructions for a micro:bit-powered plant incubator, utilizing sensors to monitor soil humidity, air humidity, and temperature. It provides detailed hardware and software preparations, wiring diagrams, and sample programs using Mind+ and MakeCode. The system alerts users when environmental conditions are unsuitable for plant growth, ensuring optimal cultivation.

    3. Example Code for Other-Grain Bin Humidity Monitoring

    This article offers example code and setup guidance for a grain bin humidity monitoring system, detailing hardware preparation, wiring, and software implementation.

    Reference

    This article provides an in-depth look at humidity sensors, explaining their principle and function, including how they detect air moisture using dielectric materials and display data on OLED modules.

    Specification

    Parameter Value
    Operating Voltage 3V-5V
    Connector PH2.0-3P
    Product Dimension 22*26(mm)/1.02×0.87"

    Pinout

    Label Name Description
    1 GND Ground
    2 VCC Power Input
    3 A Signal Input(Analog)

    Was this article helpful?

    TOP