CommunityForumWikiBlogLearn
Modules
IO Expansion Shields & HATs

Xbee Wireless Expansion Board

SKU: DFR0015

The Xbee Wireless Expansion Board is a versatile, low-power shield for Arduino that enables wireless capabilities through Zigbee, WiFi, and Bluetooth modules, making it ideal for IoT projects needing dual Xbee modules and seamless data transmission without configuration.

Angled shot of the back of an Arduino Xbee Shield with blue connectors-DFRobot product sku:DFR0015 image.

Downloadable Resources

  • Docs
  • Tech Specs

    • Specification

    Supported/Compatible Devices Models
    Direct support Arduino UNO, Arduino Duelimanove, DFRduino UNO
    Compatible with all Xbee interface devices Xbee 1mw / 2mw, Xbee Pro, Xbee 2.5 series, Bluetooth Bee, Wireless Programming Module
    Jumper Function Switch communication connection with the PC and the Arduino Xbee

    Pinout

    More details

    • RUN&USB Config xbee/bluetooth/wifi bee setting via PC using AT commands
    • RUN&Xbee Drive the xbee module via Arduino TTL pins for sending commands
    • PROG Turn to "PROG" when programming Arduino processors(UNO/Mega/ADK).

    The PROG function is useless for Arduino Leonardo,because its programming interface is isolated from D0&D1 pins. And if using Arduino Leonardo,need to program a simple Serial to Serial1 transparent communication code to configure Xbee setting directly.

    Was this article helpful?

    TOP