CommunityForumWikiBlogLearn
Modules
LCDs/LEDs/E-ink/Displays

32x16 RGB LED Display Panel

SKU: DFR0471

This 32x16 RGB LED Matrix Panel features 512 independent full-color LEDs, needing at least 13 digital GPIOs. It has 2 IDC connectors (DATA_IN/DATA_OUT) for cascading, but Arduino can’t support this due to speed limits. Key specs: high brightness, long life, no pollution, pure color. Suitable for indoor/outdoor use, anti-extrusion, works in harsh environments. Note: Requires 5V@2A power; 4+ panels need controllers like Mega2560/Raspberry.

Front of 32x16 RGB LED Matrix Panel with grid holes-DFRobot product sku:DFR0471 image.

Downloadable Resources

  • Docs
  • Tech Specs

    • Specification

    Parameter Value
    Operating voltage DC 5V
    Average power consumption <500W/㎡
    Maxim Power Consumption <1000w/㎡
    Pixel 32x16=512
    Level of viewing Angle ≧160°
    Control mode Synchronous control
    Drive mode 1/8 scan rate
    Repetition frequency ≧60Hz
    White Balance Brightness ≧1200cd/㎡
    Refresh frequency ≧300Hz
    MTTF ≧5000 hours
    Service Life 75000~100000 hours
    Pixel pitch 6mm
    Dimension 192mm96mm/7.563.78 inches
    Thickness 11mm

    Pinout

    Note: The pin order of DATA-IN and ADTA-OUT is same，POWER SUPPLY 5V.

    DFR0471 32x16 RGB LED Matrix Panel (6mm pitch) Board Overview
    Label Name Function
    1 DR1 High R data
    2 DG1 High G data
    3 DB1 High B data
    4 GND GND
    5 DR2 Low R data
    6 DG2 Low G data
    7 DB2 Low B data
    8 GND GND
    9 A A line selection
    10 B B line selection
    11 C C line selection
    12 D D line selection
    13 CLK CLOCK
    14 LAT LATCH
    15 OE Output Enable
    16 GND GND

    DATA-IN and DATA-OUT

    Label Name Function
    1 VCC 5V
    2 VCC 5V
    3 GND GND
    4 GND GND

    POWER

    Was this article helpful?

    TOP