Reference

Communication Protocol Description

Check Playback Status(01)

Command: AA 01 00 AB

Return: AA 01 01 Playback status SM

Explanation: You can check the play status at any time.

Play(02)

Command: AA 02 00 AC

Return: None

Explanation: Play the current track from the beginning at any time.

Pause(03)

Command: AA 03 00 AD

Return: None

Playstop(04)

Command: AA 04 00 AE

Return: None

Prev Audio(05)

Command: AA 05 00 AF

Return: None

Next Audio(06)

Command: AA 06 00 B0

Return: None

Specified Audio:(07)

Command: AA 07 02 Upper-Byte Lower-Byte SM

Return: None

E.g. AA 07 02 00 08 BB will specify to play the eighth audio in the current drive, and the audio number is from 1 to 65535.

Play the audio in specified drive of specified path.(08)

Command: AA 08 length drive path SM

Return: None

Explanation: length= drive length + path length=1+ path length

Check the current online drive.(09)

Command: AA 09 00 B3

Return: AA 09 01 Drive SM

Explanation: The online drive is differentiated by bitwise usb:bit (0) sd:bit (1) flash:bit (2)

It can check the current online drive. It is recommended that you check the current online drive before switching the drive.

Check the current drive(0A) to play

Command: AA 0A 00 84

Return: AA 0A 01 Drive SM

Switch to the specified drive(0B)

Command: AA 0B 01 drive SM

Return: None

Explanation: It is drive switching command. If the current drive is online, you can switch it to the corresponding drive and wait to play. After switching, the module plays the first audio of this drive. It is recommended to check whether the drive is online before you switch.

Check the total audios(0C)

Command: AA 0C 00 B6

Return: AA 0C 02 Upper-byte Lower-byte SM

Check the current audio(0D)

Command: AA 0D 00 B7

Return: AA 0D 02 upper-byte lower-byte SM

The Directory of the previous folder(0E)

Command: AA 0E 00 B8

Return: None

Explanation: The first audio in the folder will be played after switching.

The directory of the next folder(0F)

Command: AA 0F 00 B9

Return: None

Explanation: The first audio in the folder will be played after switching.

End to play(10)

Command: AA 10 00 BA

Explanation: This command can end the current operations in advance. If the command end a cut-in, it will end in advance and return to the original status.

Check the first audio in the folder(11)

Command: AA 11 00 BB

Return: AA 11 02 Upper-byte Lower-byte SM

Explanation: It is the sequence number of the first audio.

Check the total numbers of audio in all folders(12)

Command: AA 12 00 BC

Return: AA 12 02 Upper-byte Lower-byte SM

Explanation: This number does not contain the number of files in subdirectories.

Volume settings(13)

Command: AA 13 01 VOL SM

Return: None

Explanation: AA 13 01 14 D2 Set volume to level 20.

Increase the volume(14)

Command: AA 14 00 BE

Return: None

Reduce the volume(15)

Command: AA 15 00 BF

Return: None

Cut-in a specific audio(16)

Command: AA 16 03 drive Upper-byte Lower-byte SM

Return: None

E.g. AA 16 03 00 00 09 CC Cut-in the 9th audio in the USB flash drive.

Explanation: Continue to play the original audio when cut-in audio is played.

Cut-in the audio on the specified path(17)

Command: AA 17 Length Drive Path SM

Return: None

Explanation: length= drive length + path length=1+ path length

Set the loop mode(18)

Command: AA 18 01 loop mode

Return: None

E.g. Set to end single play AA 18 01 03 C6

Set the number of loop times(19)

Command: AA 19 02 Upper-byte Lower-byte SM

Return: None

Explain: This command is only valid when the loop mode is Full Loop, Single Loop, Catalog Loop.

E.g. AA 19 02 00 06 CB Repeat 6 times.

EQ Setting (1A)

Command: AA 1A 01 EQ SM

Return: None

E.g. AA 1A 01 02 C7 Set EQ to ROCK

Combination Play(1B)

Command: AA 1B Upper-byte of the audio 1, Lower-byte of the audio 1...Upper-byte of the audio n, Lower byte of the audio n.

Return: None

E.g. AA1B04303130328C, audios with file names of 01 and 02 are grouped together to play

Explanation: The combination of file names is very convenient, more accurate than combined file numbers, and is not restricted by the copy order limitation.

End Combination Play(1C)

Command: AA 1C 00 C6

Return: None

Explanation: End combination playback, and return the play state before the combination.

Set channels(1D)

Command: AA 1D 01 channels SM

Return: None

Check the short-file name(1E)

Command: AA 1E 00 C8

Return: AA 1E The length of short-file name Short-file name SM

Select audio but do not play(1F)

Command: AA 1F 02 Upper-byte Lower-byte SM

Return: None

Control of Repetition(20)

Command: AA 20 04 beginning-minute beginning-second ending-minute ending-second SM

Return: None

End repetition(21)

Command: AA 21 00 CB

Return: None

Specify the time to rewind(22)

Command: AA 22 02 Upper-byte Lower-byte SM

Return: None

Explanation: The unit is seconds

Specify the time to wind(23)

Command: AA 23 02 Upper-byte Lower-byte SM

Return: None

Explanation: The unit is seconds

Get the total time of the current audio(24)

Command: AA 24 00 CE

Return: AA 24 03 hour minute second SM

Start the playback time sending(25)

Command: AA 25 00 CF

Return: AA 25 03 hour minute second SM

Explanation: Start to send playing time, Return automatically when the time is updated.

End to send the playing time(26)

Command: AA 26 00 D0

Return: None

Explanation: End the playback time sending.