Getting Started
Last revision 2026/01/18
The article introduces the Breakout module, highlighting its SPI communication and GDI interface that simplify wiring and enable easy display of SD card content, with recommendations for using Arduino 1.8.10 and tips for troubleshooting SD card initialization.
The product is a Breakout module. It adopts SPI communication and has onboard GDI interface, which reduces the complexity of wiring and can easily display the contents read from SD card.
Note:
- The GDI interface should be used in conjunction with the main controller board with GDI interface
- It is recommended to use Arduino 1.8.10 and above
- If the SD card slot is in poor contact, it may fail to initialize. Please try to replug it.
Was this article helpful?