Usage Example for LattePanda-Serial Debugger Control

Hardware Preparation

• LattePanda V1 x1
• DFR0684 RS485 Connector Expansion Shield for LattePanda V1 x1
• DFR0290 8 Channel IoT Ethernet Relay Controller x1

Wiring Diagram

1. Connect the Shield and LattePanda V1
   
2. Use the Copper Columns and screws to fix the shield on LattePanda Board.

Note: Not Sopport Hot Plugging

Using Serial Debugger

1. Connect the LattePanda with RS485 connector shield, turn it on.
2. Power on the 8 Channel IoT Ethernet Relay Controller.
3. Use the serial debugger to send the related commands to control the relay module according to the user-defined communication principle of the 8 channel relay controller.

Result

Turn on/off the relay No.1, shown as below.