CommunityForumWikiBlogLearn
Modules
Power Modules

12V to 5V 2/4-Channel Photoelectric Isolation Level Converter Module

SKU: DFR0912

Are you still distressed that industrial sensors can't be used on Arduino? You may need to get a converter just like this! This 12V to 5V level converter module with 2/4-channel photoelectric isolation features common anode / common cathode / differential signal inputs. The level shifter translates signal level from 12V to 5V and offers PNP output (NPN to PNP available). It can be used for signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion, signal level voltage conversion and so on.

Front of green plastic connector with two prongs for 12V to 5V level conversion.-DFRobot product sku:DFR0912 image.

Downloadable Resources

  • Docs
  • Tech Specs

    • Specification

    Parameter 2-channel Optocoupler Isolation 4-channel Optocoupler Isolation
    Input Channel 2-channel Optocoupler Isolation 4-channel Optocoupler Isolation
    Output Signal PNP Output (NPN to PNP available) PNP Output (NPN to PNP available)
    Sensor Input Voltage 12V 12V
    Module Supply Voltage 5V 5V
    Input Signal Level 12V 12V
    Output Signal Level 5V 5V
    Output Current no more than 50mA for each channel no more than 50mA for each channel
    Indicator SMD LED SMD LED
    Size of Bare Board 38x72x19mm/1.50x2.83x0.75” 45x72x19mm/1.77x2.83x0.75”
    Size of Converter with Shell 40x87x39mm/1.57x3.43x1.54” 47x87x39mm/1.85x3.43x1.54"
    Size of Screw Hole 3mm 3mm
    Installation Specification With Shell (Fit on standard rails) With Shell (Fit on standard rails)

    Pinout

    • Common Anode Signal Input


    • Common Cathode Signal Input


    • Differential Signal Input


    Was this article helpful?

    TOP