SKU: DFR0921
The Terminal Block Shield for Arduino Mega is designed to secure wires, ensuring stable and reliable connections for projects. It features multiple 3.3V, 5V, and GND ports, and can operate with a voltage range of 7~24V without requiring an additional buck-down circuit. The onboard 18pin-FPC socket allows convenient screen connections, making it an essential tool for preventing loose wiring issues during project development.
_360x240.jpg.webp)
Downloadable Resources
| Parameter | Value |
|---|---|
| VIN Input Voltage | 7-24V DC |
| Max Load Power | 10W |
| Terminal Block Pitch | 3.5mm |
| Wire Size Range | 26AWG-16AWG |
| Wire Strip Length | 5mm |
| Screw | M2 |
| Dimension | 101.5 *53.3 mm/4.00*2.10” |
| FPC PINS | Beetle ESP32 C3 Pins | Description |
|---|---|---|
| VCC | 5V | 5V |
| BLK (PWM dimming) | D7 | Backlight |
| GND | GND | GND |
| SCLK | D52 | SPI clock |
| MOSI | D51 | Host output, slave input |
| MISO | D50 | Host input, slave output |
| DC | D2 | Data/command |
| RES | D4 | Reset |
| CS | D3 | TFT Chip Select |
| SDCS | D6 | SD card chip select |
| FCS | D25 | Font library |
| TCS | D5 | Touch |
| SCL | SCL | I2C clock |
| SDA | SDA | I2C data |
| INT | D19 | INT |
| BUSY-TE | D24 | ripstop pins |
| X1 | D23 | custom pin 1 |
| X2 | D22 | custom pin 2 |
Was this article helpful?