15.6 inch 1920×1080 IPS Capacitive Touch Display

1. Example for LattePanda 3 Delta-Type-C Interface

This guide details the process of setting up a 15.6-inch IPS Touch Screen with a LattePanda 3 Delta using a TYPE-C interface, focusing on hardware preparation, screen connection, and mainboard installation, showcasing seamless audio-video, touch, and power signal integration.

2. Example for HDMI Audio-Video Input

This article elaborates on setting up HDMI audio-video input using Raspberry Pi 4B and LattePanda 3 Delta. It details hardware preparation, screen connection, and mainboard installation, including the use of HDMI adapter modules. The guide highlights the necessity of additional power supply for Raspberry Pi to drive the display.

Specification

Screen parameters

No.	Item	Specification
1	LCD size	15.6 inches
2	Resolution	1920×1080
3	Pixel pitch (um)	179.25(H) × 179.25(V)
4	Pixel arrangement	RGB Vertical Stripe
5	Color gamut	45%
6	Display colors	262k (6-bit)
7	Active area(mm)	344.16(H)×193.59(V)
8	Surface treatment	Anti-Glare
9	Surface hardness	3H
10	Luminance	250cd/㎡
11	Refresh rate	60Hz
12	Transmittance	≥86%
13	View angle	Full viewing angle
14	Number of touch	10
15	Touch panel hardness	≥6H
16	Bonding method	Optical bonding
17	Outline dimension (mm)	369.5(H)×288.6(V)×5.2(D)
18	Interface	eDP
19	LCD Brand	BOE
20	Operating temperature	0~+50℃
21	Weight	766g

Display driver board parameters

No.	Item	Specification
1	Display interface	Type-C/HDMI-A
2	Speaker interface	MX1.25-4P
3	Touch interface	Type-C
4	Power interface	Type-C
5	Supply voltage	PD3.0, 5~20V
6	Mounting Hole Size	Hole diameter 3.0mm
7	PCB size(mm)	125(V)×110(H)×1.6(D)

Touch control board parameters

No.	Item	Specification
1	Touch chip	ILI2511
2	Touch interface	MX1.25-4P
3	Mounting Hole Size	Hole diameter 3.0mm
4	PCB size(mm)	50(H)×26(V)×4.8(D)

Pinout

15.6 inch touchscreen

DFR1045-Screen

No.	Name	Description
①	Display interface	eDP interface
②	Touch cable	FPC cable

Display driver board

DFR1045-Driver board

No.	Name	Description	Note
①	Type-C CN1	Power, touch, audio-video signals, reverse power	Power supply range: 5~20V
②	Type-C CN2	Power, touch, audio-video signals, reverse power	Power supply range: 5~20V
③	HDMI	HDMI input interface	When HDMI input is used, only the Type-C CN2 interface supports the transmission of touch signals.
④	Speaker	Stereo speaker interface (Rated power: 8Ω 1W)	Left channel: LN (-), LP (+)；Right channel: RP (+), RN (-)
⑤	eDP	eDP output interface
⑥	Touch	Touch interface

Touch control board

DFR1045-Touch control board

No.	Name	Description
①	FPC cable interface	Connecting the touch cable of the screen
②	USB touch interface	Connecting the touch interface on the display driver board