Gravity: Linear / Analog Hall Effect Sensor

1. Example Code for micro:bit-MakeCode Serial Print

Place a magnet in the sensor detection area, and print the detected data via the serial port.

2. Example Code for micro:bit-MindPlus Serial Print

Place a magnet in the sensor detection area, and print the detected data through the MindPlus terminal.

3. Example Code for Arduino-MindPlus Analog Read

When the Hall circuit faces the S pole of the magnet, the analog value gradually increases. Conversely, when facing the N pole of the magnet, the analog value gradually decreases.

4. Example Code for Arduino-Arduino IDE Analog Read

When the Hall circuit faces the S pole of the magnet, the analog value gradually increases. Conversely, when facing the N pole of the magnet, the analog value gradually decreases.

5. Example Code for UNIHIKER-Python Data Display

Connect the sensor to hardware port P21 on the UNIHIKER, and then display the data detected by the sensor on the UNIHIKER.

6. Example Code for UNIHIKER-Graphical Programming Data Display

Connect the sensor to hardware P21 on the UNIHIKER, then display the data detected by the sensor on the UNIHIKER.