Instructions for use
Connect the Thunderbolt network card to the host, wait for the blue LED to stay on and the driver to install, then plug in the network cable and confirm the yellow LED blinks to access the internet.
For Linux and Mac, driverless operation is required. For Windows, an internet connection is needed for the system to automatically download the driver or for manual installation. Instructions are as follows: After connecting the Thunderbolt network card to the host device, the network card's indicator light (blue led) will remain lit, indicating that the host device has recognized the network card. After a short while, the system will automatically install the driver. You can see the network card model in Device Manager. Finally, connect the network cable to the network card. At this time, the network indicator light (yellow led) will flash continuously. After the network is recognized, you can access the internet normally.
Was this article helpful?