Effect Demonstration Example for K10
System Functions：Pour water into the rainwater collection tank to simulate the process of collecting rainwater on rainy days.The K10 display shows real-time data of water volume and soil moisture.When the water level in the tank exceeds the set value and the soil moisture is below the set threshold, the water pump starts operating.Water drips from the dropper until the soil reaches the set moisture level. Then the pump stops and the drip irrigation is completed.
Demonstration Video
Hardware Diagram
| SENSOR | PIN |
|---|---|
| Water Level Sensor | P0 |
| Soil Moisture Sensor | C0 |
| Water Pump | M1 |
Example Code
Mind+ Upload Mode User Library Link for Building Block Expansion Board
Download the Example Code
Drip Irrigation for K10.mpcode
Was this article helpful?