Effect Demonstration Example for K10
Adjust the knob module; the blades start rotating, simulating the wind power generation process.The K10 display screen shows the stored energy increasing, simulating electricity storage.When the stored energy reaches 100%, it indicates the storage device is full, and the RGB LED lights up green.Adjust the knob module in the opposite direction; the blades stop rotating, simulating the electricity consumption process.The K10 display screen shows the stored energy decreasing. When the stored energy is depleted, the RGB LED lights up red.Turn the knob again; the blades rotate, starting a new power generation cycle.
Demonstration Video
Hardware Diagram
| SENSOR | PIN |
|---|---|
| Rotation sensor Interface | P0 |
| 360° Servo （Geekservo） | M4 |
Example Code
Mind+ Upload Mode User Library Link for Building Block Expansion Board
Download the Example Code
Wind Energy Kit for K10.mpcode
Was this article helpful?