Getting Started with Smart City Kit

Smart City Kit includes input modules, an RFID module, visual output, a servo, and recognition cards, connecting to UNIHIKER K10 via the IO Extender for building smart city projects.

What You Need

EDU0253 Smart City Kit
UNIHIKER K10 (not included)
Computer running Mind+ 2.0
Data-capable Type-C USB cable (not included)

Know the Kit

The kit combines input modules, an RFID module, visual output, a servo, recognition cards and building blocks. The IO Extender connects the external modules to UNIHIKER K10.

Install Mind+

Install the supported version of Mind+ 2.0 or Go to https://ide.mindplus.top/upload/projects/editor to start programming.
Select the board and programming mode specified by the course.
Connect UNIHIKER K10 with a data-capable Type-C USB cable.
Confirm that Mind+ recognizes the device and then select connect device.

4. Install the IO Extender

Disconnect power, align the IO Extender with the K10 connector, press it evenly into place.

Install the protector as shown in the assembly guide.

Connect the Core Modules

Module	Signal Type	Connection Rule
Digital Push Button	Digital input	Use the digital port specified by the project
Tilt Sensor	Digital input	Use the digital port specified by the project
RFID Module (DFR1811)	RFID input	Use the interface and cable specified by the final wiring diagram
RGB LED Strip	Output	Use the output port specified by the project
Building-block Servo	PWM output	Use the servo port specified by the project