Effect Demonstration Example for K10
How to quickly build and run a BOSON hydroponics demo with the K10 kit: connect the Grow LED strip to P0, the water level sensor to P1, the pH sensor to C0, and the peristaltic pump to M2, then upload the sample program via Mind+ using the Building Block Expansion Board library and the Hydroponics Kit-K10.mpcode file to automate light, nutrient dosing, and water level control. It’s like wiring a smart mini greenhouse, where each sensor and actuator has a fixed port so beginners, educators, and young makers can focus on observing plant growth and understanding pH and water management instead of struggling with wiring or firmware setup, lowering the barrier to hands-on STEM learning and making it easy to replicate or extend the project in classrooms, workshops, or home experiments.
Demonstration Video
Hardware Diagram
| SENSOR | PIN |
|---|---|
| Grow LED Strip Light | P0 |
| Water Level Sensor | P1 |
| pH Sensor | C0 |
| Peristaltic Pump | M2 |
Example Code
Mind+ Upload Mode User Library Link for Building Block Expansion Board
Download the Example Code
K10-Hydroponics-Kit.zip
Was this article helpful?