Getting Started

Usage Precautions

• Before use, confirm whether the working voltage matches the specified voltage for the M0601.

• Ensure the motor operates within the specified ambient temperature range.

• Avoid immersing the motor in water, as this may cause malfunction or damage.

• Before use, ensure all wiring is correct and secure to prevent poor contact.

• Before operating the motor, refer to the installation instructions to ensure the motor is installed correctly and securely.

• Before operating the motor, refer to the installation instructions to ensure the external output parts are installed correctly and securely.

• Avoid damaging the cables during use, as this may lead to motor malfunction or damage.

• Do not touch the rotating parts of the motor during operation to prevent injury.

• When the motor outputs high torque, it may generate heat. Do not touch the motor to avoid burns.

• Do not disassemble the motor without authorization, as this may cause malfunction, damage, and potential safety hazards.

Installation Guidelines

Please installing the motor on the custom device refer to the size and position of the motor mounting holes. Unit: mm

The installation hole on the stator is M2.5 (φ2.5), 5mm depth, distributed at the φ15.2 circle and the 8mm flat position.
Please choose proper screws for installation.

Initial Setup Steps

1. Set the motor ID (saved in FLASH when power off)

2. Set motor mode（current loop, velocity loop, angle loop, default in velocity loop）

3. Send the set value