Reference

Safety Precautions

1. Robotic Arm Fixation
   Before powering on, securely fasten the base of the robotic arm in a flat position using screws to prevent tipping and potential harm during mechanical movement.

2. Personal Safety
   Do not place hands within the range of the robotic arm’s movement to avoid pinching injuries.

3. Servo Motor Operation
   Servo motors should not be locked for an extended period, as it may cause damage to the servo motor and the driver board, or even cause personal injury.

4. Power Supply Safety
   The rated voltage for this product is 5V, with a power supply range of 4.8–8.4V. Operating below or exceeding this voltage range may cause damage to the servo motors, power supply, and driver board.

5. Motor Power
   This product employs six servo motor drives, each rated at 210mA with a stall current of up to 3400mA. Insufficient power supply may lead to abnormal operation of the robotic arm, servo motor damage, and other related issues.

Driver Board Recommendations

• DFR0225：Romeo V2 - a Robot Control Board
• DFR0305：Romeo BLE - A Control Board for Robot
• DFR0351：Romeo BLE mini - Small Control Board for Robot

Shipping List

• 6-DOF Robotic Arm V2(Pre-Assembled) ×1
• Mechanical Gripper (Installed on the Robotic Arm) ×1
• Spare Screws Kit ×1
• Spare Allen Wrench ×2
• Servo Extension Cables ×6