Reference
Last revision 2025/12/20
This reference guide delves into the Gravity I2C BME280 Environmental Sensor's features, including its communication protocol, API, MakeCode block module, and library installation for Arduino IDE.
Library
Principle
The Gravity I2C BME280 Environmental Sensor has based on BoSCH's newest MEMS sensor (Micro-Electro-Mechanical System). It is very stable when compared with similar sensors. The sensor is especially adept in air pressure measurement; it has an offset temperature coefficient of ±1.5 Pa/K, equiv. to ±12.6 cm at 1 °C temperature change.
Other Supplementary Information
- Schematic
- Layout
- Datasheet
- Github Repository
- Arduino SPI Connection Diagram:
Was this article helpful?