Waterproof Ultrasonic Distance Sensor (27~800cm)

SKU: SEN0300

This is an ultrasonic distance sensor(ULS) of high performance with an enclosed waterproof probe. The sensor, like many other ultrasonic sensors, based on the principle of ultrasonic echo ranging, determines the distance to a target by measuring time lapses between the sending of a pulse and receiving of the echo without contacting. It can be used to detect transparent or non-ferrous objects, metal or non-metallic objects, liquid, solid, powder materials and so on. The unique physical bell-mouth shell of the sensor greatly improves the directivity and stability of its output ultrasound.

Front of waterproof ultrasonic sensor with distance measurement label and port-DFRobot product sku:SEN0300 image.
  • Docs
  • Tech Specs
  • Specification

    Parameter Value
    Operating Voltage 3.3~12V(DC)
    Average Current <10mA
    Effective Detecting Distance 27-800cm/ 10.63-314.96 inches
    Output Mode - PWM:without temperature compensation, directly output 3.3V TTL PWM signal, the working period must be over 60ms.
    - UART: with temperature compensation and temperature output, trigger by external signal, output 3.3V TTL serial data, the working period must be over 60ms.
    - Switch: auto-detecting distance with 250ms working period. The detected value will be compared with the pre-set threshold value so as to control the output state of switch(output high level 3.3V by default).
    Probe Frequency 40K±1.0K Hz
    Measurement Accuracy - PWM Output: ±(1+S0.5%)cm
    - UART Output: ±(1+S
    0.3%)cm
    - Switch Output: ±(1+S*0.3%)cm
    Operating Temperature -15~60℃
    Storage Temperature -25~80℃
    Operating Humidity RH<80%
    Storage Humidity RH<90%
    Measurement Period <60ms
    Dimension 60 x 43.2x 31.4mm/2.36x1.70x1.24"
    SEN0300 Water-proof Ultrasonic Sensor (ULS) Specification SEN0300 Water-proof Ultrasonic Sensor (ULS) Dimension Diagram

    Pinout

    SEN0300 Water-proof Ultrasonic Sensor (ULS) Output Format
    Num Pin Description
    1 VCC 3.3V~12V Power input
    2 Trigger Trigger
    3 TX/PWM Serial and PWM Output
    4 ON-OFFout Switch Output
    5 GND Ground

    Was this article helpful?

    TOP