Reference
Last revision 2025/12/17
This reference guide covers essential precautions for using MEMS gas sensors, including avoiding exposure to volatile compounds, corrosive gases, and extreme environments. It also introduces various sensor options and links to supplementary documents for further information.
Other Supplementary Information
Precautions for use
- Kindly remove the protective film before usage.
- To prevent exposure to volatile silicon compounds vapors (such as silicone adhesive, hair gel, silicone rubber, or other locations where volatile silicon compounds are present).
- Avoid exposure to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.).
- Prevent contamination from alkalis, alkali metal salts, and halogens.
- Refrain from prolonged exposure to extreme environments (such as high temperatures, high humidity, high pollution).
- Avoid contact with water, condensation, and freezing.
- Minimize excessive vibration, impact, and dropping.
- Please refrain from employing this module in systems that involve personal safety concerns.
- For extended periods of non-usage, it is advisable to preheat the module for at least 24 hours.
Other Mems Gas Sensors
More Documents
Was this article helpful?