Getting Started
Configure the I2C address of the BMI323 sensor using an onboard pad. Open pad sets the address to 0x69, while short pad sets it to 0x68. Effortlessly switch between addresses without additional hardware modifications. Perfect for projects requiring flexible sensor address setups.
Pad Configuration Description (I2C Address Selection)
The sensor has 1 independent pad on board for switching the I2C address of the BMI323.
The target address can be flexibly configured by setting the pad to open / short, without additional hardware modifications.
BMI323 Sensor I2C Address Configuration Rules
The pad state directly determines the I2C communication address of the BMI323. The configuration rules are as follows:
- Pad open: I2C address = 0x69
- Pad short: I2C address = 0x68
Was this article helpful?