Logging in and Accessing the Web Administration Console

1. Accessing on the Local Computer

If the SIoT service is running on the computer you are currently using:

1. Open your web browser.
2. Enter http://127.0.0.1:8080 or http://localhost:8080 in the address bar. Both of these loopback addresses represent accessing the SIoT service running locally on your current computer.
   

2. Accessing Directly on Unihiker M10

If your SIoT is running independently within the onboard system of the Unihiker M10:

• USB Direct Connection Access (Recommended): Connect the Unihiker M10 to your computer using a USB cable, and enter the static IP of the Unihiker in your computer's browser: http://10.1.2.3. After entering the Unihiker web home page, click the "Open Page" button on the page to jump to the login interface of the built-in SIoT on the Unihiker.

  Open the SIoT web page on the UNIHIKER M10.	SIoT Web Login Interface

• Wi-Fi Wireless Access: If you have already configured Wi-Fi for the Unihiker M10, you can also enter the actual wireless LAN IP obtained by the Unihiker (e.g., `http://192.168.0.169) directly in the browser of other computers or devices within the same Wi-Fi local area network (LAN) to access the administration interface.

  

3. Accessing on Other Devices in the Local Area Network (LAN)

If you need to access the SIoT console running on your computer from other devices on the same local area network (such as mobile phones, tablets, or other student computers in the LAN):

1. Determine the actual LAN IP address of the host computer running the SIoT service (e.g., 192.168.1.183).
2. In the browser of a mobile phone, tablet, or another computer on the same LAN, enter: http://192.168.1.183:8080 (i.e., Actual LAN IP:8080).

Open SIoT V1 on the mobile phone	Open SIoT V2 on the mobile phone

[!WARNING]
Troubleshooting Key Points for Access Failure:

• The accessing device (such as a phone) and the computer where the SIoT server is deployed must be connected to the same Wi-Fi or LAN switch.
• Windows Firewall must have allowed SIoT (see [Doc 1] for details).
• The computer's LAN IP must be entered correctly.

4. Default Login Username and Password

After the login interface is loaded successfully, use the platform's built-in default administrator credentials to log in:

• Default Username: siot
• Default Password: dfrobot

	Login Page	Data Management Interface
V1
V2