Getting Started
Last revision 2026/01/07
The crucial safety measures for module usage, focusing on proper power supply connection, dip switch settings, and pressing frequency to prevent chip damage.
After the module is connected to the DC power supply, it is forbidden to press the power push button since the generated excessive energy may burn the chip.
When pressing the power generation button or using DC power, at least one of the dip switches on the module must be dialed up, otherwise the chip will be burned.
The pressing frequency should not exceed 3 times/sec. Continuous rapid pressing will result in energy accumulation that cannot be consumed in time, and eventually burn the chip.**
Was this article helpful?