Usage Example
This article guides readers through setting up a fiber optic communication system, detailing required hardware and wiring instructions for effective data transmission using UART transceiver modules and single-mode fiber optics.
Hardware Preparation
To build a fiber optic communication system, the following hardwares are required
- Gravity: UART Fiber Optic Transceiver Module x 2
- Single-mode dual-core fiber optic with SC interface
Wiring Instructions
For example, connect the MCU to a long-range sensor using the fiber optic module
Note: The pins TX and RX both in the UART connection of the fiber optic module and a device and the connection between fiber optic modules should be cross-connected, that is, RX to TX and TX to RX, otherwise the data can't be transferred normally.
Was this article helpful?