Configuration Guide for Internet Access on LattePanda
Last revision 2025/12/30
This guide explains how to set up internet access on a LattePanda device using a 4G module, covering hardware requirements and detailed operational steps including SIMCOM driver installation and network configuration.
Internet Access on LattePanda
Hardware Preparation
-
Keyboard ×1
Operation steps
-
Insert the SIM card into the A7670G 4G Module slot, then connect the module and LattePanda via USB, and also connect the keyboard and touch screen to LattePanda.
-
Power on and wait for LattePanda to boot
-
Under network status, install the SIMCOM driver according to the method in the sample application
- SIMCOM driver: Download address
-
After installation, restart LattePanda and check the Simcom port in the device management interface to confirm that the driver of the 4G module has been successfully installed.
-
Finally, find the 4G module as a new network connection in "Change Adapter Settings", right-click and select "Connect", and you can use the 4G module as a network card for LattePanda.
Was this article helpful?