SKU: DFR0125
The DFRduino Ethernet W5100S Shield connects Arduino to the Internet via RJ45. It uses WizNet W5100S chip, integrating full TCP/IP stacks and 4 hardware sockets. Communicate with it/SD card via SPI (ICSP pin). Supports Arduino UNO/Mega. V3.0 upgrades from W5100: lower power, less heat, better performance.
Downloadable Resources
1. Example Code for Arduino-Get Internet Time
This sample shows how to get network time from the NTP time server. Upload the sample, and open the serial monitor to see the time.
2. Example Code for Arduino-View IO Status Web Server
This sample turns UNO into a Web server that other devices in the same LAN can access to view IO status.
3. Example Code for Arduino-Control IO Status Web Page
This sample allows other devices on the same LAN to control the status of IO2 and IO3 via the Web page.
4. DFRduino W5100S Ethernet Shield v2.0
This Wiki documents an older version of the DFRduino W5100S Ethernet Shield v2.0 and is provided for reference only.
Reference
Was this article helpful?
