Example Code for Arduino - Get Network Time via WiFi

Hardware Preparation

• FireBeetle 2 ESP32-C6 (SKU: DFR1075) * 1
• USB Type-C Cable (Included with the board) * 1

Software Preparation

• Download Arduino IDE： Click to download Arduino IDE

Sample Code

This demo is from CSDN blogger[Naisu Xu].

#include <WiFi.h>

const char *ssid = "********";    //WIFI Name
const char *password = "********"; //WIFI Password 

const char *ntpServer = "pool.ntp.org";
const long gmtOffset_sec = 8 * 3600;
const int daylightOffset_sec = 0;

void printLocalTime()
{
    struct tm timeinfo;
    if (!getLocalTime(&timeinfo))
    {
        Serial.println("Failed to obtain time");
        return;
    }
    Serial.println(&timeinfo, "%F %T %A"); // Format output 
}

void setup()
{
    Serial.begin(115200);
    Serial.println();

    WiFi.begin(ssid, password);
    while (WiFi.status() != WL_CONNECTED)
    {
        delay(500);
        Serial.print(".");
    }
    Serial.println("WiFi connected!");

    // Get time from network time server and configure it 
    // When succeed, the chip will use RTC clock to keep the time updated 
    configTime(gmtOffset_sec, daylightOffset_sec, ntpServer);
    printLocalTime();

    WiFi.disconnect(true);
    WiFi.mode(WIFI_OFF);
    Serial.println("WiFi disconnected!");
}

void loop()
{
    delay(1000);
    printLocalTime();
}

Other Supplementary Information

struct tm

struct tm {
	int tm_sec; // second, from 0-59;
	int tm_min; // minute, from 0-59;
	int tm_hour; // hour, from 0-23;
	int tm_mday; // day in a month, from 1-31;
	int tm_mon; // month, from 0-11;
	int tm_year; // year, = real year-1900;
	int tm_wday; // Week, from 0-6, 0 for sunday, 1 for monday, and so on; 
	int tm_yday; // Date in a year, from 0-365, 0 for January 1, 1 for January 2, and so on; 
	int tm_isdst; // Daylight Saving Time identifier, tm_isdst is positive when DST is implemented; tm_isdst is equal to 0 if DST is not implemented; tm_isdst() is negative for unknown situation 
};

struct tm Format Output