SKU: DRI0014
The new Veyron brushless motor controller DFBLDC(1x5A) provides 3 different kinds Input modes(PPM、UART、ANALOG) it is especially designed for brushless motors which are widely used in robotics industry because of their high-performance and good reliability.
1. UART Mode Software Debugging
2. Example Code for UART Mode Control
This code can be used to control the brushless motor driver in the UART Mode.
3. Example Code for PPM Mode Control
It is compatible with standard aero-model PPM interface, and you can also set the value of the width and the amplitude of the pulse signal yourself. Values between the minimum value and the medium value stand for clockwise rotation, and those between the medium value and the maximum value stand for counter-clockwise rotation, while the medium value stands for stop. This code can be used to control the brushless motor driver in the PPM Mode.
4. Example Code for Analog Mode Control
0~2.5V input stands for clockwise rotation, and 2.5~5V input stands for counter-clockwise rotation, while 2.5V stands for stop.
Reference
FAQ
It requires 8~30V power supply(12~24V recommended), if your power is less than 8V, it will show error.
Motor: please connect motor to the driver, or it will still show “error”.
Please connect the motor power interface (8~30V) first, and Arduino board later
Was this article helpful?