UART Mode Software Debugging

Software Debugging

Software: Sensorless BLDC Driver Tool V1.zip

Step1

Please pay attention on "RX" and "TX". This is the connection with USB-TTL convertor. If you want to use UNO, please exchange RX and TX.

Step2

Open the software, and select the correct COM port.

Step3

Click "Read" to read the motor status.It will show "Read successfully" on the bottom.

Step4

Move the slider to control the speed and direction of the motor.

For the further detail, please check the Device Manual. motor-driver-manual-V1 English.pdf