Reference
Last revision 2026/01/27
Communication Protocol Description
For UART, PPM and ANALOG Mode, the communication depends on "S1" and "S2". The ports are assigned as the table shown below:
| Toggle Switch State | Working Mode |
|---|---|
| 1: OFF 2:OFF | UART |
| 1: OFF 2:ON | PPM |
| 1: ON 2:OFF | ANALOG |
| 1: ON 2:ON | RESERVED |
Baudrate Types:1200/2400/4800/9600/14400/19200/28800/38400/57600/115200
Was this article helpful?