Motor replacement method

Maqueen V5 adopts a design with replaceable motors. If the motor is damaged due to high-intensity use or being dropped, it can be replaced in the following way.

1 Remove the motor

1.1 Remove the two screws on the battery box

1.2 Unplug the power connection cable of the battery box

1.3 Remove the 4 motor fixing screws

1.4 Take out the motor and the buckle upwards

1.5 Take out the motor buckle in an inclined way

At this point, the motor disassembly is completed.

2 Install the motor

2.1 Insert the motor buckle in an inclined way to avoid the PCB solder joints

2.2 Press down gently to complete the installation of the buckle

2.3 Insert the motor with the buckle installed downwards into the motor interface

2.4 Screw on the 4 fixing screws on the back of the PCB

2.5 Plug in the connection cable of the battery box

2.6 Fix the 2 screws of the battery box

Note: The power cord of the battery box needs to be placed on the left side of the car to avoid the influence between the power cord and the wheels, as shown in the figure in the previous step.

2.7 Install the wheels

Note that the notch of the wheel needs to be aligned with the notch position of the motor shaft. Otherwise, it may not be installed correctly, or the wheel or the motor may be damaged.

At this point, the motor installation is completed.