Chapter 5: Continuation Of The Assembly Process
Last revision 2026/01/13
The article guides readers through setting up Wi-Fi control on the Intel® Edison microprocessor, enabling remote robot commands and video streaming, providing an intermediate-level experience in robot control.
As we mentioned in the introduction, The Intel® Edison microprocessor comes with an Integrated Wi-Fi module which supports wireless control and video streaming. Compare to other functions that we have gone through in pervious chapters, setting up the Wi-Fi function will bring you to an intermediate level of robot control. By setting up the Wi-Fi function, you can not only send commands to your robot through internet or local network, but also receive real time feedback and save it to your computer. In this chapter, we will go through a quick guide to help you set up the Wi-Fi function and use it as a remote controller for your Devastator.
Getting Started
Open your Arduino IDE, select the serial port attached for your Romeo for edison COM port ( varies on different computers ).
Your page should look something like this
Was this article helpful?