Example code for Arduino-Add Fingerprints

Requirements

• Hardware

  • DFRduino Leonardo (or similar) x 1
  • ID809 Capacitive Fingerprint Module x1
  • Dupont Wires

• Software

  • Arduino IDE
  • Download and install the ID809 Library. (About how to install the library?)

Connection Diagram

Leonardo Connection

UNO Connection

Sample Code 3-Add Fingerprints

This sample automatically obtains the registrable ID, then collects the fingerprint three times, the yellow light flashes three times successfully. At last, save the fingerprint to the acquired unregistered ID, the green light is on for 1s, and then turns off.

/*!
 * @file fingerprintRegistration.ino
 * @brief Fingerprint Acquisition and Saving 
 * @n This module can be controlled by hardware serial or software serial 
 * @n Experiment Phenomenon：auto retrieve unregistered ID, collect fingerprint 3 times.  
 * @n           In collecting, set LED ring to breathing lighting in blue, and then to quick blink in yellow 3 times when completed 
 * @n           At last, save the fingerprint in an unregistered ID, the green LED lights up for 1s and turns off. 
 * @copyright  Copyright (c) 2010 DFRobot Co.Ltd (http://www.dfrobot.com)
 * @licence     The MIT License (MIT)
 * @author [Eddard]([email protected])
 * @version  V1.0
 * @date  2020-03-19
 * @get from https://www.dfrobot.com
 * @url https://github.com/cdjq/DFRobot_ID809
*/

#include <DFRobot_ID809.h>

#define COLLECT_NUMBER 3  //Fingerprint sampling times, can be set to 2-3

/*Use software serial when using UNO or NANO */
#if ((defined ARDUINO_AVR_UNO) || (defined ARDUINO_AVR_NANO))
    #include <SoftwareSerial.h>
    SoftwareSerial Serial1(2, 3);  //RX, TX
    #define FPSerial Serial1
#else
    #define FPSerial Serial1
#endif

DFRobot_ID809 fingerprint;
//String desc;

void setup(){
  /*Init print serial port */
  Serial.begin(9600);
  /*Init FPSerial*/
  FPSerial.begin(115200);
  /*Take FPSerial as communication port of the module*/
  fingerprint.begin(FPSerial);
  /*Wait for Serial to open*/
  while(!Serial);
  /*Test whether the device can communicate properly with mainboard 
    Return true or false
    */
  while(fingerprint.isConnected() == false){
    Serial.println("Communication with device failed, please check connection");
    /*Get error code information*/
    //desc = fingerprint.getErrorDescription();
    //Serial.println(desc);
    delay(1000);
  }
}

uint8_t ID,i,ret;

void loop(){
  /*Get an unregistered ID for saving fingerprint 
    Return ID when succeeded 
    Return ERR_ID809 if failed 
   */
  if((ID = fingerprint.getEmptyID()) == ERR_ID809){
    while(1){
      /*Get error code information*/
      //desc = fingerprint.getErrorDescription();
      //Serial.println(desc);
      delay(1000);
    }
  }
  Serial.print("unresistered ID,ID=");
  Serial.println(ID);
  i = 0;   //Clear sampling times 
  /*Fingerprint sampling 3 times*/
  while(i < COLLECT_NUMBER){
    /*Set fingerprint LED ring mode, color, and number of blinks 
      Can be set as follows: 
      Parameter 1:<LEDMode>
      eBreathing   eFastBlink   eKeepsOn    eNormalClose
      eFadeIn      eFadeOut     eSlowBlink   
      Parameter 2:<LEDColor>
      eLEDGreen  eLEDRed      eLEDYellow   eLEDBlue
      eLEDCyan   eLEDMagenta  eLEDWhite
      Parameter 3:<Number of blinks> 0 represents blinking all the time 
      This parameter will only be valid in mode eBreathing, eFastBlink, eSlowBlink
     */
    fingerprint.ctrlLED(/*LEDMode = */fingerprint.eBreathing, /*LEDColor = */fingerprint.eLEDBlue, /*blinkCount = */0);
    Serial.print("The fingerprint sampling of the");
    Serial.print(i+1);
    Serial.println("(th) is being taken");
    Serial.println("Please press down your finger");
    /*Capture fingerprint image, 10s idle timeout, if timeout=0,Disable  the collection timeout function
      IF succeeded, return 0, otherwise, return ERR_ID809
     */
    if((fingerprint.collectionFingerprint(/*timeout = */10)) != ERR_ID809){
      /*Set fingerprint LED ring to quick blink in yellow 3 times */
      fingerprint.ctrlLED(/*LEDMode = */fingerprint.eFastBlink, /*LEDColor = */fingerprint.eLEDYellow, /*blinkCount = */3);
      Serial.println("Sampling succeeds");
      i++;   //Sampling times +1
    }else{
      Serial.println("Sampling failed");
      /*Get error code information*/
      //desc = fingerprint.getErrorDescription();
      //Serial.println(desc);
    }
    Serial.println("Please release your finger");
    /*Wait for finger to release 
      Return 1 when finger is detected, otherwise return 0 
     */
    while(fingerprint.detectFinger());
  }
  
  /*Save fingerprint in an unregistered ID */
  if(fingerprint.storeFingerprint(/*Empty ID = */ID) != ERR_ID809){
    Serial.print("Saving succeed，ID=");
    Serial.println(ID);
    Serial.println("-----------------------------");
    /*Set fingerprint LED ring to always ON in green */
    fingerprint.ctrlLED(/*LEDMode = */fingerprint.eKeepsOn, /*LEDColor = */fingerprint.eLEDGreen, /*blinkCount = */0);
    delay(1000);
    /*Turn off fingerprint LED ring */
    fingerprint.ctrlLED(/*LEDMode = */fingerprint.eNormalClose, /*LEDColor = */fingerprint.eLEDBlue, /*blinkCount = */0);
    delay(1000);
  }else{
    Serial.println("Saving failed");
    /*Get error code information*/
    //desc = fingerprint.getErrorDescription();
    //Serial.println(desc);
  }
}

Expected Result 3