SKU: DFR0785-G
The Gravity LED Button Sensor is an illuminated switch with a transparent cap that lights up in various colors when pressed, providing visual feedback and enhancing interactive projects, especially with micro:bit.
| Parameter | Description |
|---|---|
| Operating Voltage | +3.3-5V (3.3V is recommended) |
| Output | digital |
| Connector | PH2.0-3P |
| Dimension | 27¡Á26.5mm |
| LED Colors Available | red, yellow, green, blue, white |
Note: If pressed, this module will output high level and light LED up. If released, it will output low level and light LED out.
| Num | Silk-screen | Description |
|---|---|---|
| 1 | D | Control port |
| 2 | + | VCC |
| 3 | - | GND |
Was this article helpful?