Devastator Tank Mobile Robot Platform Kit

Q: The track is a little loose, is there any way I can do to tight the track?

To change the intension of the track, you just need a strong and fine tool, here I use tweezers. 1. Find the thin bolt used to connect track shoes, normally the side shown on the picture is easier to push <img src="https://raw.githubusercontent.com/DFRobot/DFRobotMediaWikiImage/master/Image/TRACK1.png" alt=""> 2. Use the tweezes to push the bolt out of the track, it may be a little tight, be careful! <img src="https://raw.githubusercontent.com/DFRobot/DFRobotMediaWikiImage/master/Image/TRACK2.png" alt=""> 3. Remove the bolt, do the same steps to remove some track shoes according to your Devastator <img src="https://raw.githubusercontent.com/DFRobot/DFRobotMediaWikiImage/master/Image/TRACK3.png" alt=""> 4. Insert the bolt back and finish! <img src="https://raw.githubusercontent.com/DFRobot/DFRobotMediaWikiImage/master/Image/TRACK4.png" alt="">

1. Instruction Manual

This article outlines the steps for assembling a robot chassis, connecting electronics including microcontroller and motor wiring, and selecting power options such as AA batteries or a rechargeable LiPo battery, enhancing the robot's performance and functionality.

2. Example Code for Arduino-Keyboard Control

This guide offers a detailed walkthrough on utilizing Arduino to control a Devastator Tank with keyboard inputs. It includes wiring diagrams, sample code, and troubleshooting advice for motor direction adjustments.

Parameter	Value
Working Voltage	3-8V DC
Drive Wheel Diameter	43mm
Maximum Speed	36cm/s
Dimensions	225220108
Weight	780g
Motor Specification	Motor Specification

Devastator Tank Mobile Robot Platform Kit

Specification