Example Code for Raspberry Pi-Wakeup function

Hardware Preparation

• Raspberry Pi 4B (or similar) × 1
• LIS331HH Triple Axis Accelerometer × 1
• Some Jumper wires

Software Preparation

• Raspberry Pi Official OS
• Download and install the LIS Series Python Library.

Wiring Diagram

Connect the module to the Raspberry Pi according to the connection diagram. The default I2C address is 0×19.

Other Preparation Work

1. Enable the I2C interface of the Raspberry Pi. If it is already enabled, you can skip this step. Open Terminal, type the following command, and press Enter:

   sudo raspi-config
   

   Then use the up and down keys to select "5 Interfacing Options", press Enter, select "P5 I2C", and press Enter to confirm "YES". Restart the Raspberry Pi main control board.

2. To install Python dependent libraries and git, the Raspberry Pi needs to be connected to the Internet. If it is already installed, you can skip this step. In the terminal, type the following commands in sequence, and press Enter:

   sudo apt-get update
   

   sudo apt-get install build-essential python-dev python-smbus git
   

3. Download the LIS series driver library. In the terminal, type the following commands in sequence and press Enter:

   cd Desktop
   

   git clone https://github.com/DFRobot/DFRobot_LIS
   

4. In the terminal, type the following command and press Enter, run the sample code:

   cd DFRobot_LIS/Python/raspberrypi/examples/LIS331HH 
   

   cd wake_up
   

   python wake_up.py
   

Result