Usage Example for Firmware Update
Last revision 2026/01/22
This article outlines the complete process for updating firmware on WiFi Bee using an Arduino IDE and MT7681 Update Tool, including necessary hardware and software preparations, step-by-step operation instructions, and expected results.
Hardware Preparation
- TEL0107 WiFi Bee x1
- USB Xbee Adapter x1
- FIT0265 Micro USB cable x1
Software Preparation
- Download and install the Arduino IDE: Click to Download Arduino IDE
- Download and install the Firmware Update Tool: Click to Download MT7681UPDATE V1.0
Operation Steps
- Plug WiFi Bee on the adapter
- Open MT7681 Update Tool
- Select the newest firmware
- Select COM port and click "Update"
Result
Was this article helpful?