Usage Example for TCP Server-UART Communication
Last revision 2026/01/22
WiFi Bee supports TCP & UDP service, in this section, we'll demonstrates the TCP <-->UART communication.
Hardware Preparation
- Xbee USB Adapter, or Leonardo with Xbee socket (Burned the debugging code) x1
- WifiBee-MT7681 x1
Software Preparation
- Arduino IDE click to download Arduino IDE
- Net Assistant software, like putty
Operation Steps
- Plug WiFiBee on the adapter
- configure network parameter: "WiFiBee IP Address", "Port: 1000" (Port: 1000 is the WiFi Bee default server port. If you need it working under client mode, you need to configure its Remote Server Address, refer to AT Command List)
- Click "Open" to open the terminal
Was this article helpful?